Lantronix MSS4 Installation Manual Download | Manualshive

Page: 8 / 76

background image

Introduction

MSS Features

1-2

Ease of Use

The MSS4 has a simple but powerful command interface for both users and system managers. The
MSS Local mode supports command line editing and command line recall. An extensive

Help

facility

is included.

The EZWebCon utility (provided on the CD-ROM) allows you to configure the MSS from any host
machine running the Java Virtual Machine (JVM). It also allows remote host logins into the MSS,
which are similar to Telnet logins.

The Lantronix ThinWeb Manager, a set of HTML pages stored on the MSS, allows you to configure
server information via a JavaScript-enabled web browser. For more information, see

Web Browser

Login and Configuration

on page 3-5.

Remote Configuration

The MSS can be logged into and remotely configured via a network login, a Telnet login to the remote
console port, EZWebCon, or a web browser connection to the MSS’s internal HTTP server.

Context-Sensitive Help

Context-sensitive on-line help is available at any time. You may type

Help

by itself for overall help,

Help <command>

for help on a specific command, or a partial command line followed by a question

mark for help on what is appropriate at that point.

Note:

See the MSS Reference Manual for more information.

Reloadable Operating Software

The MSS stores its operating code in Flash ROM, which means that it does not have to download code
at boot time. If necessary, you can upgrade the MSS’s operating code to support additional features
as newer code becomes available. Also, you can configure the MSS to request a downloaded
configuration file at boot time.

Security

The MSS includes several configurable security features:

Automatic session logouts when a port is disconnected or a device is turned off.

Password protection for privileges, ports, services, maintenance commands, and the remote
console.

An IP security table, which allows the MSS manager to restrict incoming and outgoing TCP/IP
connections to certain ports and hosts. This allows managers to restrict MSS access to a particular
local network segment or host.

Diagnostics

Power-up and interactive diagnostics help system managers troubleshoot network and serial line
problems.

SDK Support

The MSS supports the Lantronix Software Developer Kit (SDK), which allows users to customize the
MSS and add functionality. For more information about the SDK, please contact Lantronix directly.

Note:

The SDK does not allow users to configure custom PC card support.

«
...
6
7
8
9
10
...
»

Summary of Contents for MSS4













































































Reviews:

No comments

Related manuals for MSS4

Flex System x240 Compute Node

Brand: IBM Pages: 28

Brand: Oki Pages: 2

Brand: Edimax Pages: 93

Brand: Novell Pages: 152

SCHROFF 11850-016

Brand: nvent Pages: 18

AlphaServer ES45 1B

Brand: Compaq Pages: 322

PRIMERGY PG-RSBOP2

Brand: Fujitsu Pages: 68

SPARC Enterprise T5440 Server

Brand: Fujitsu Pages: 92

SPARC Enterprise T5140

Brand: Fujitsu Pages: 138

SPARC Enterprise T5440 Server

Brand: Fujitsu Pages: 214

SPARC Enterprise T5140

Brand: Fujitsu Pages: 130

Brand: Fujitsu Pages: 514

Brand: Vxl Pages: 2

2622W-P - annexe 1

Brand: SMC Networks Pages: 83

Brand: Edimax Pages: 14

Brand: Equitel Pages: 40

Brand: Echostreams Pages: 3

Industrial Ethernet Serial Server LES401A LES401A

Brand: Black Box Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands