Lantronix LS Series, User Manual, Page: 13 / 26

Lantronix LSS2200-8P MobileApp User Guide
33870 Rev. A https://www.lantronix.com/ 13
TRANSFER
is used to transmit the saved configuration(s) information into the switch(es).
Note
: the switch does
not need to be powered, connected, or even removed from the box to do this. Simply lift the switch box lid and
follow the steps. The TRANSFER screens are shown below.
Buttons
:
TAP AND GO : Click to transfer the highlighted/selected configuration into a switch. Hold the smartphone or tablet
so the NFC reader is directly over the NFC target on the switch front cover. The device must be within about 4 cm
of the switch. You will hear a “chime” when the configuration file has been transferred and the Mobile App will
display the message “
Config transferred successfully
”. If you hear a low tone, the configuration has not been
transferred. This is usually because of improper positioning of the device. The Mobile App will display a message
asking you to
Please reposition your device closer to the NFC antenna
and try again.
Select TAP AND GO and reposition the device, being sure to align the NFC reader area of the device directly
over the NFC target on the switch cover.
DELETE FILE : Click to delete the highlighted/selected configuration file after it has been transferred and is no
longer needed.
EXPORT : Click to export the highlighted/selected configuration file to make edits and changes using a different
device. Note: this is a future enhancement and there is currently no capability to export or re-import files.
Click
← to go back to the Home page.
EXPORT:

“ Unfortunately TNMobileApp has stopped ” message displays. Click the OK button to clear the
message. The message “
Scanning for tags
” displays, then the Detected tag screen displays (see below).