Lantronix
IONMM-232 Install Guide
33725 Rev. B
21
9.
Is Management VLAN enabled?
Yes
No
a)
Make sure that the management station/PC is part of
the same VLAN as the IONMM-232.
b)
Make sure that the correct port is being used on the
IONMM-232.
c)
Is access restored?
•
Yes – end procedure.
•
No – continue with
step 10
.
Continue with
step 10
.
10.
Disable the Management VLAN function. At the USB command prompt, type
set mgmt vlan
state=disable
and press
Enter
.
11.
If the problem persists, contact Technical Support.
Management Module does not power on
1.
Does the chassis have power?
Yes
No
Check that the IONMM-232 is seated
properly in the chassis.
a)
Check that the ION chassis power cord is
plugged into the unit and the wall socket.
b)
Move the IONMM-232 to a different
chassis slot.
2.
If the problem persists
,
contact Technical Support.
