Hardware Interfaces
FOX3-2G/3G/4G Series Hardware Manual
36
Figure 14.1:
Connecting the battery to the FOX3-2G/3G/4G devices
7.3.1.
How to enter the PIN of the inserted SIM card
To insert the PIN of the SIM card follow the steps below
(as reference use fig. 15)
:
1)
Install the
Workbench
software,
2)
Connect your FOX3-2G/3G/4G to a free PC COM port via its Promotion Kit and power up
your device.
How to set up your FOX3-2G/3G/4G using a Evalboard, is currently in preparation.
3)
Start the
Workbench
software, open a
COM Port
(1)
,
a
Terminal
(2)
and an
Editor
(3)
,
then
select the COM port
(4)
and port settings (115200 bps, 8 Data bits, No Parity bit, 1 Stop bit, None
Flow control).
4)
Next, click on the
Connect
icon (II) on the left of the text "
Port
", to connect to. Connect
the
Console
(5)
to the
COM Port
and the
Editor
(6)
to the
Console
on the
Connection view
. For more
details refer to the Workbench User Guide.
5)
Finally, type the command
$PFAL,Cnf.Set,GSM.PIN=xxxx
on the editor (xxxx=PIN of your
SIM card) and then send it to the device by double-click. For more details refer to the manual
“
AVL_PFAL_Configuration_Command_Set.pdf
”.
Figure 15:
Entering the PIN code of the inserted SIM card.
