How to Use BLE with the FOX3-3G-BLE Device
12
Figure 4
: Result of the found BLE devices near the tablet
9.
A terminal starts (see Figure below)
Figure 5
: Terminal interface on the “BLE Spp Demo”
10.
Click on the "connect/disconnect" symbol
to establish the BLE connection.
11.
Once the BLE connection between the FOX3-3G-BLE and the tablet is established, the FOX3-
3G-BLE generates the event:
SYS.BLE.eConnected
and starts sending its data periodically
(every 5 seconds), (see Figure below).
Figure 6
: The tablet receives data from the FOX3-3G-BLE
