EDS Device Servers Command Reference
4
1: Introduction
EDS device servers (EDS4100, EDS8PR, EDS16PR, and EDS32PR) contain all the
components necessary to deliver full network connectivity to virtually any kind of serial
device, a reliable TCP/IP protocol stack, and a variety of remote management
capabilities. They boast an innovative design and run on Lantronix’s leading-edge
Evolution OS™, which supports three convenient configuration methods (Web, command
line, and XML). The EDS User Guide describes how to configure the EDS using a web
interface.
Command-Line Interface (CLI):
Making the edge-to-enterprise vision a reality, the EDS
with the Evolution OS™ uses industry-standard tools for configuration, communication,
and control. For example, the Evolution OS™ uses a Cisco
®
-like command line interface
(CLI) whose syntax is very similar to that used by data center equipment such as routers
and hubs
This Command Reference provides information about navigating the CLI interface and
lists the CLI commands for configuring, monitoring, and controlling the EDS.
XML-based Architecture and Device Control:
XML is a fundamental building block for
the future growth of M2M network. The EDS supports XML-based configuration and
setup records that makes device configuration transparent to users and administrators.
The XML is easily editable with a standard text or XML editor.
This command reference provides a brief overview of the XML interface, shows typical
XML commands, and provides best practices for using XML commands.
