3: Summary of CLI Commands
EDS Device Servers Command Reference
39
Tunnel Menu Command
Description
connect keep alive
<
number
>
Enables TCP keepalives and the sets timer in
milliseconds.
<
number
> = number of milliseconds to which the timer is
set.
connect modem control
active
Enable Connect mode when the modem control pin is set
to asserted.
connect modem emulation
Enables modem emulation.
connect port <
number
>
Sets the specific port to use as the local port.
<
number
> = number of the port to be used as the local
port.
connect protocol ssh
Uses SSH for connect mode.
connect protocol tcp
Uses TCP for connect mode.
connect protocol tcp aes
Uses AES over TCP for connect mode.
connect protocol udp
Uses UDP for connect mode.
connect protocol udp aes
Uses AES over UDP for connect mode.
connect reconnect timer
<
milliseconds
>
Sets the reconnect time value in milliseconds.
<
milliseconds
> = number of milliseconds.
connect remote <
host
>
Sets the remote address in which to connect.
<
host
> = host IP address.
connect remote port
<
number
>
Sets remote port
<
number
> = port number of remote port.
connect ssh username
<
string
>
Sets the SSH user information.
<
string
> = SSH user information.
connect start character
Enables connect mode on reception of the start character.
disconnect dsr inactive
Enables disconnect mode to disconnect if DSR not
asserted.
disconnect flush serial
data
Flushes serial data buffer upon disconnection.
