Lantronix EDS1100, Command Reference Manual

Page: 63 / 152

5: Commands and Levels
EDS1100/2100 Command Reference 63
clrscrn Clears the screen.
exit Returns to the tunnel level.
flush serial disable Does not flush serial data upon closing a tunneling connection.
flush serial enable Flushes serial data buffer when a tunneling connection is closed.
flush stop character disable Forwards the stop character from the Line to the network.
flush stop character enable Prevents the stop character from the Line from being forwarded to
the network.
modem control disable Does not watch the modem control pin to disconnect.
modem control enable Watches the modem control pin and disconnects if it is not
asserted.
no stop character Removes the stop character.
no timeout Disables disconnect after timeout feature for tunneling sessions.
show Displays the current configuration.
show history Displays the last 20 commands entered during the current CLI
session.
stop character <control> Sets the stop character.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
timeout <milliseconds> Disconnects when no data has been received on the line (serial
port) for the
specified length of time.
<milliseconds> = timeout in milliseconds.
write Stores the current configuration in permanent memory.
dns (dns) level commands
clrscrn Clears the screen.
exit Exits to the enable level.
lookup <host_or_ip> Return a lookup on the DNS name or IP address.
remove all Removes all entries from the DNS Cache.
remove host <host> Removes an entry from the DNS Cache.
show Show DNS status and cache entries.
show history Displays the last 20 commands entered during the current CLI
session.
write Stores the current configuration in permanent memory.
email 1 (email:1) level commands
auto show statistics Continuously displays email statistics.
cc <text> Sets Cc addresses for email alerts.
<text> = a quoted, semicolon separated list of email addresses.
clear log Clears all entries from the mail log.
clear mail counters Sets the email counters to zero.
clrscrn Clears the screen.
default local port Sets the local port (used to send email alerts) to random.
default priority Sets X-Priority for email alerts to 3 (normal).
default server port Restores the factory default port for SMTP on the server side.