Lantronix EDS1100 Command Reference Manual Download Page 53

Page: 53 / 152

5: Commands and Levels

EDS1100/2100 Command Reference

clrscrn

Clears the screen.

default accept mode

Restores the default accept mode as "always".

default protocol

Restores the default protocol as "TCP".

default start character

Defaults the accept mode start character.

default tcp keep alive

Restores the default 45 second accept mode TCP keep alive
timeout.

email connect

<number>

Sets an email profile to use to send an email alert upon
establishing
an accept mode tunnel.
<number> = the number of the email profile to use.

email disconnect

<number>

Sets an email profile to use to send an email alert upon closing
an accept mode tunnel.
<number> = the number of the email profile to use.

exit

Returns to the tunnel level.

flush serial disable

Characters already in the serial data buffer are retained upon
establishing
an accept mode tunneling connection.

flush serial enable

Flushes the serial data buffer upon establishing an accept mode
tunneling
connection.

flush start character disable

Enables forwarding of the accept start character into the network.

flush start character enable

Disables forwarding of the accept start character into the network.

kill connection

Disconnects the active accept mode tunneling connection.

local port

<number>

Sets the port to use for accept mode tunneling.
<number> = number of the port to use.

no aes decrypt key

Removes the accept tunnel AES decrypt key.

no aes encrypt key

Removes the accept tunnel AES encrypt key.

no email connect

Discontinues sending email alerts upon establishing an accept
mode tunnel.

no email disconnect

Discontinues sending email alerts upon closing an accept mode
tunnel.

no local port

Uses the default port number as the local port for accept mode
tunneling.
The default port is 10000 + #, where # is the line number for this
tunnel.

no tcp keep alive

Disables the accept mode TCP keep alive timeout.

password

Enters the next lower level.

protocol ssh

Uses SSH protocol for accept mode tunneling.

protocol ssl

Uses SSL protocol for accept mode tunneling.

protocol tcp

Uses TCP protocol for accept mode tunneling.

protocol tcp aes

Uses TCP protocol with AES encryption for accept mode tunneling.

protocol telnet

Uses Telnet protocol (with IAC) for accept mode tunneling.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current CLI
session.

show status

Displays tunnel accept status.

start character

<control>

Sets the accept mode start character.

Summary of Contents for EDS1100

























































































































































Search results

Summary of Contents for EDS1100

Reviews:

Related manuals for EDS1100

Brands by name

Popular brands

Lantronix EDS1100, Command Reference Manual

Search results

Summary of Contents for EDS1100

Reviews:

Related manuals for EDS1100

Brands by name

Popular brands