Lantronix EDS-MD EDS-MD4, Command Reference Manual

Page: 101 / 338

5: Commands and Levels
EDS-MD Command Reference 101
reply to <text> Sets the Reply To address for email alerts.
<text> = email address to place in the Reply To field of the
email alert.
send Sends an email using the current settings.
server port <number> Sets the port used by the SMTP server.
<number> = port used for SMTP on the server side.
show Displays the current configuration.
show history Displays the last 20 commands entered during the current CLI
session.
show log Displays the email log.
show statistics Displays email statistics.
subject <text> Sets the Subject for email alerts.
<text> = text to placed as the subject.
to <text> Sets To addresses for email alerts.
<text> = a quoted, semicolon separated list of email addresses.
write Stores the current configuration in permanent memory.
enable (enable) level commands
auto show interfaces Show interface statistics
auto show processes Continuously show thread runtime information
clrscrn Clears the screen.
configure Enters the configuration level.
connect Show name and number for lines.
connect line <line> Begin session on serial port.
device Enters the device level.
disable Exits the enable level.
dns Enters the DNS level.
email <number> Enters the configure email level.
exit Exit from the system
filesystem Enters the filesystem level.
kill ssh <session> Kills SSH session with index from "show sessions"
kill telnet <session> Kills Telnet session with index from "show sessions"
line <line> Enters the line level.
<line> = number of the line (serial port) to be configured.
ping <host> Ping destination continuously with 5 second timeout
ping <host> <count> Ping destination n times with 5 second timeout
ping <host> <count> <timeout> Ping destination n times with x timeout (in seconds)
reload Reboot system
reload factory defaults Reload factory defaults to permanent storage
show Show system information
show history Displays the last 20 commands entered during the current CLI
session.
show interfaces Show interface statistics
show ip sockets Show UDP/TCP state information
show lines Show line information
show processes Show thread runtime information
show sessions Show active Telnet and SSH Sessions
ssh Enters the SSH configuration level.