Lantronix DeviceLinx Xchip Direct SoC, User Manual

Page: 10 / 62

DeviceLinx™ XPort Direct/XChip Direct SoC User Guide 10
1: Using This Guide
Purpose and Audience
This guide covers DeviceLinx XPort™ Direct Device Gateway Module
(XPD1001xxx-01 ) and the DeviceLinx XChip™ Direct SoC (XCD1001xxx-01). It
provides the information needed to configure, use and update the XPort™ Direct
firmware and is intended for OEMs and system integrators who are embedding the
XPort Direct or XChip Direct in their end product designs.
Note: The XChip Direct is a deployment-ready Device Gateway SoC
coprocessor bundled with the XPort Direct firmware. All references to XChip
Direct in this document relate to the combination of the physical chip and the
licensed firmware that delivers the XPort Direct functionality.
EX100000-02R + XPort Direct firmware = XCD1001000-01 (XChip Direct )
Chapter Summary
The remaining chapters in this guide include:
Chapter Description
2: Introduction Describes the main features of the XPort Direct and the
protocols it supports.
3: Using DeviceInstaller Provides information for getting your unit up and running,
using DeviceInstaller to assign an IP address.
4: Configuration via Telnet or
Serial Port (Setup Mode) Provides instructions for accessing Setup Mode
(command line interface) using a Telnet connection
through the network or the serial port.
5: Setup Mode: Server
Configuration Details the network (server) settings
6: Setup Mode: Channel
Configuration Details the serial port settings.
7: Setup Mode: Advanced
Settings Details expert and security settings and explains how to
reset the unit to factory default values.
8: GPIO Interface Provides instructions for configuring the General Purpose
I/O pins.
9: Firmware Upgrades Provides instructions for obtaining the latest firmware and
updating the XPort Direct.
10: Monitor Mode Provides instructions for accessing and using the
command line interface for monitoring the network and
diagnosing problems.