manualshive.com logo in svg

Lantronix Device Server MSS 485, Installation Manual, Page: 48 / 69

Share
Download
Lantronix Device Server MSS 485 Installation Manual Download Page 48

 

Technical Support

 

 

A - 1

 

A - Technical Support

 

Lantronix
15353 Barranca Parkway
Irvine, CA 92618, USA
Phone: (949) 453-3990
Fax (949) 453-3995
Technical Support
Phone: (800) 422-7044 or (949) 453-7198
Fax: (949) 450-7226
On-line: www.lantronix.com/support

If you are submitting a problem, please provide the following 
information: 

•

Your name, company name, address, and phone number

•

Product name

•

Unit serial number

•

Software version (issue the 

 

Show Server 

 

command)

•

Network con

fi

guration including the output of a 

 

Netstat

 

 com-

mand

•

Description of the problem

•

Debug report (stack dump) if applicable

•

Product status when the problem occurred. Please try to include 
information on user and network activity at the time.

•

If the problem is related to the serial port, please include the 
results of 

 

Show Ports

 

 and 

 

Show Server Characteristics

 

.

Summary of Contents for Device Server MSS 485






































































Reviews:

No comments