In-Vehicle Installation Guidelines for FOX3-2G/3G/4G and BOLERO40 Series
17
1.13
CA70 - Main port basic vehicle installation cable
The main port basic installation cable with 3pin (2x4) connector and open ends.
The pin function, wire assignments and colour codes on the vehicle installation cable for FOX-2G/3G/4G and
BOLERO40 series is listed in table below:
PIN
COLOR
FUNCTION
I/O
DESCRIPTION
1
Pink
+IN
I
INPUT, V+IN = + 10.8 ... + 32.0 VDC; Imax ≤ 2A
2
Brown
GND
-
3
Violette
IGN
I
INPUT HIGH ≥+10.8 .. +32.0 V DC; LOW = 0V
(It can be used to wake up the device from IGN sleep)
Table 4:
Description of cable CA70
1.14
CA69 – Accessory port cable
The accessory port cable with 6pin (2x3) connector, 4pin (2x2) UCOM connector and open ends can be used
for FOX3-2G/3G/4G series (excl. LITE models).
The pin function, wire assignments and colour codes on the vehicle installation cable for FOX-2G/3G/4G
series is listed in table below:
PIN
COLOR
FUNCTION
I/O
DESCRIPTION
1
Pink
1-Wire
I/O
1-Wire master interface for Driver ID, temperature and humidity sensors. VOUT
= + 2.8 .. +5.0 V
2
Brown
GND
-
Ground Reference.
3
Violette
RxA_1
I
Serial port 1 (receive data) for direct connection to the host PC. If not used leave
it open. V24, ±12 V
4
Black
TxA_1
O
Serial port 1 (transmit data) for direct connection to the host PC. If not used
leave it open. V24, ±12 V
5
Yellow
SCL (I²C)
O
Not supported
6
Green
SDA (I²C)
I/O
Not supported
Table 5:
Description of cable CA69
