Introduction
BOLERO40 Series Hardware Manual
7
•
Bike & Car sharing
•
Territory management/Theft protection/
•
Route verification/Trip management
•
Distance calculations
•
Personalized drivers logbook
•
Toll collection / pay as you drive
•
Eco-Drive - (PREMIUM feature)
•
Encrypted TCP based on AES 128 bit algorithm - (PREMIUM feature) and more.
1.2
Circuit concept & System architecture
The architecture of the BOLERO40 Series consists of the following major components:
Figure 1:
BOLERO40 Series block diagram
The principle of system operation is very simple. In each car is installed one of BOLERO40
series device, which consists of:
•
A GNSS-receiver to receive signals from GPS/GLONAS/Galileo/BeiDou navigation
satellites,
•
A GSM/2G/3G modem to transmit the data by radio to the internet or via SMS.
The GNSS receiver inside the device receives incoming signals from each satellite in view.
These signals include information about the satellite position and the time. The receiver
uses this satellites data to calculate its exact position. The data can then be transmitted
over 2G/3G network (IP-based) through the Internet to your remote server or via SMS to a
remote SMS server via GSM. A user-developed program on the remote server can help you
to connect the device to the server and get all information the device sends.