Lightwave Communications
DVI Fiberlynx
www.lightwavecom.com
November
2001
18
B.6 Compliance and Certification
CLASS 1 LASER PRODUCT
The DVI Fiberlynx has been classified a CLASS 1 LASER Product in accordance
with standards IEC 60825-1 and IEC 60825-2. Always operate the product in
accordance with the instructions contained in Section 2 of the manual.
Entela Electrical Safety Certification (equivalent to UL 1950 and CSA 950)
Entela is a USA OSHA Nationally Recognized Testing Laboratory (NRTL),
an accredited Certification Organization by the Standards Council of
Canada (SCC), and an IECEE – CB Scheme National Certification Body
(NCB) & Certification Body Testing Laboratory (CBTL).
CE certification
Conforms to FCC part 15, Class A
Note
: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. The limits are
designed to provide a reasonable protection against harmful interference when
the equipment is operated in a commercial environment. The equipment
generates, uses and can radiate energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at their own expense.
