Lantech QL-400, Manual, Page: 87 / 101

APPENDIX – WARRANTY
87
8.2 Warranty
All Lantech machines include a warranty against a defect in:
•
Material
•
Design
•
Manufacturing
Lantech has the option to repair, replace the machine or part, if:
•
Lantech is the manufacturer, vendor of the part
•
The part is defective
•
Lantech knows about the defect before the warranty period ends
Obey the steps below to prevent the cancellation of your warranty.
These actions can cancel the warranty:
•
The failure to operate the machine by Lantech instructions
•
The failure to obey the maintenance instructions
•
A change to the parts, the machine without Lantech approval
•
An accident that can cause the machine to be damaged
•
An environment where the weather conditions can cause the machine to be damaged.
•
The failure to operate the machine by the environmental specifications.
This includes:
o
An environment where moisture causes corrosion of parts
o
Explosive environment
o
The failure to prepare the area correctly for installation and maintenance
This includes:
o
The electrical supply is not sufficient
o
The floor is not flat
o
The thickness of the floor is not correct
o
The floor has a crack in the area where the machine is installed
o
The machine is installed near joints in the floor
The warranty stops if the machine moves to a new customer.
Unless Lantech agrees in writing, this warranty does not include the requirements for federal, local,
safety, environmental regulations and standards.
European standards:
•
Supply of machine with Orgalime General Conditions