manualshive.com logo in svg

Lantech QL-400, Manual, Page: 64 / 101

Share
Download
Lantech QL-400 Manual Download Page 64

OPERATOR INSTRUCTIONS 

 

64 

 

6.6

 

Initialize the Machine 

 

CAUTION 
Before you initialize the machine, read “How to Stop the Machine”. 

6.6.1

 

Lockout/Tagout Procedures 

Obey these procedures to prevent an injury from unexpected energizing, start-up, release of 
stored energy. 

1.   Move the Main Disconnect switch to the Off position. 

2.   Lock the Main Disconnect switch in the Off position. 

3.   Disconnect the power cord from the electrical outlet. 

4. 

 

Lock the power cord

.

 

6.6.2

 

How to Stop the Machine 

Push the E-stop. 

This red button safely stops the operation of the machine.   

Note:

  Some machines have a remote Emergency Stop.  It is important to know the location of 

all E-stops before you operate the machine. 

6.6.3

 

Apply the Power to the Machine 

1.

 

Move the Main Disconnect to the On position. 

2.

 

Reset the E-stop.     

3.

 

Push Reset.   

The Reset button illuminates and all functions are available to the operator. 

 

 

Summary of Contents for QL-400






































































































Reviews:

No comments