27
Edge:
The port directly connected to end stations cannot create bridging
loop in the network. To configure the port as an edge port, mark the port
Path Cost:
The cost of the path to the other bridge from this transmitting
bridge at the specified port. Enter a number 1 through 200000000
Click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
802.1X Configuration
802.1x is an IEEE authentication feature which allows a client connecting to a
wireless access point or wired switch, however, prevents the client from gaining
access to the Internet until it provides credentials, like a user name and password
that are verified by a separated server.
Mode:
To disable or enable 802.1x protocol
RADIUS IP:
Set the Radius Server IP address
RADIUS UDP Port:
Set the UDP destination port for authentication requests
to the specified Radius Server
RADIUS Secret:
Set an encryption key for use during authentication
sessions with the specified radius server. This key must match the
encryption key used on the Radius Server
Admin State:
Select the state of port
Force Authorized:
The specified port is required to be held in the
unauthorized state
Force Unauthorized:
The specified port is required to be held in the
authorized state
Auto:
The specified port is set to the authorized or unauthorized state in
accordance with the outcome of an authentication exchange between
the Supplicant and the authentication server
Summary of Contents for LGS-1424C
Page 14: ...14...
Page 42: ...42 RSTP Status interface...
