97
6.16.2 LACP Port Status
You can check the setting of Port aggregation in Status.
Group ID
Number of trunking group
TYPE
' Static for static aggregation and Dynamic for LACP.
System ID
The ID of each Trunking group
Trunk Members
Each switch port is listed for each group ID. Select a radio button to include a
port in an aggregation, or clear the radio button to remove the port from the
aggregation. By default, no ports belong to any aggregation group. Only full duplex
ports can join an aggregation and ports must be in the same speed in each group.
Summary of Contents for IPES-5408T
