Lantech IPES-5408T, User Manual

Page: 13 / 305

11
for Authentication*
IGMP Support IGMP snooping v1,v2,v3; Supports IGMP static route; 256 multicast groups; IGMP router port ; IGMP query
Multicast VLAN Registration MVR enables multicast packets go through VLAN for VOD application
Bandwidth Control Support ingress packet filter and egress packet limit.
The egress rate control supports all of packet type.
Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast
packet only and all types of packet.
The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress packet
limit.
PTP v2 & RTC Support hardware-based IEEE1588 PTPv2 in 1
μs with 4 x GigaT ports
Built-in RTC(Real Time Clock) to keep track of time
Flow Control Supports Flow Control for Full-duplex and Back Pressure for Half-duplex
Environmental Monitoring System status for input voltage, current and ambient temperature to be shown in GUI and sent alerting if any abnormal status
System Log Supports System log record and remote system log server
SMTP/Text SMS Supports SMTP Server and 6 e-mail accounts for receiving event alert; can send SMS text alert via mobile
Relay Alarm Provides one relay output for port breakdown, power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V
Protection

Miss-wiring avoidance

Repowered auto ring restore (node failure protection)

Loop protection
SNMP Trap Up to 3 trap stations; trap types including:

Device cold start

Authorization failure

Port link up/link down

PoE port event

Abnormal environmental monitoring
DHCP Provide DHCP Client/ DHCP Server/ relay Option 82*
DNS Provide DNS client feature and support Primary and Secondary DNS server.
SNTP Supports SNTP to synchronize system clock in Internet
Firmware Upgrade Firmware upgrade via TFTP or Lantech InstaConfig**
Configuration
upload and download
Supports text configuration file for system quick installation
IfAlias Each port allows an alphabetic string of 128-byte assigned as its own unique name via the SNMP or CLI interface
*Future release
**Optional