37
6.8.2 System Alert - Event
Having ticked the
Syslog
/
SMTP
checkboxes, the event log/email alert will be sent to the
system log server and the SMTP server respectively. Also, Port event log/alert (link up,
link down, and both) can be sent to the system log server/SMTP server respectively by
setting the trigger condition.
System event selection:
There are 3 event types
—Device Cold Start,
Authentication Failure, and X-ring Topology Change. The checkboxes are not
available for ticking unless the
Syslog Client Mode
on the Syslog Configuration tab
and the
E-mail Alert
on the SMTP Configuration tab are enabled first.
System Restart:
When the device executes cold start action, the system will
issue the event log/email alert to the system log/SMTP server respectively.
.
Summary of Contents for IPES-2204F
