16
Installation Steps
1. Unpacked the Industrial switch.
2. Check the DIN-Rail is screwed on the Industrial switch. If the DIN-Rail is
not screwed on the Industrial switch. Please refer to
DIN-Rail Mounting
section for DIN-Rail installation. If you want to wall mount the Industrial
switch, then please refer to
Wall-Mount Plate Mounting
section for wall
mount plate installation.
3. To hang the Industrial switch on the DIN-Rail track or wall, please refer to
the
Mounting Installation
section.
4. Power on the Industrial switch. How to wire the power; please refer to the
Wiring the Power Inputs
section. The power LED on the Industrial switch
will light up. Please refer to the
LED Indicators
section for meaning of
LED lights.
5. Prepare the twisted-pair, straight through Category 5e cable for Ethernet
connection.
6. Insert one side of Category 5e or above cable into the Industrial switch
RJ-45 port and another side of category 5e or above cable to the network
devices
’ RJ-45 port, ex: switch, PC or Server. The RJ-45 LED indicator on
the Industrial switch will light up when the cable is connected with the
network device. Please refer to the
LED Indicators
section for LED light
meaning.
7. When all connections are all set and LED lights all show in normal, the
installation is complete.
