11
Chapter 3 Hardware Installation
3.1Hardware installation
For POE models: Do not use units POE ports to uplink to another unit. (May Cause Damage)
Lantech strongly advise the installation of a Galvanic isolated DC/DC converter between the power
supply and the Ethernet switch on all Non-Isolated units. Please contact the sales team for advice
on which units support isolated power supply.
3.1.1Unpack switch and check the accessory with packing content list
3.1.2 Mount the switch on desired position. For the best ventilation, it is
suggested to mount the switch on metallic surface.
3.1.3 Connect the M12 connector of power input. The power supply for
IPES-0008B series is connected via a 5-pole M12 female connector while
IES-0008B is with a 5-pole M12 female connector as well.
Voltage of Power Input & PoE budget
Model name
Power input
PoE budget
IPES-0008B-41-12V
Dual 9~56VDC
60W for 12V input
(80W at dual input)
120W for 24V/36V
input
80W for 72V Input
(54V input is
recommended for
IPES-0008B-41-12V
(5A)
Dual 9~36VDC
IPES-0008B-41-72V
Dual 50.4~90VDC
