50
6.17.1 Configuration
Group ID:
There are 5 trunk groups to be selected. Assign the "
Group ID
" to the
trunk group.
TYPE:
When choose LACP, the trunk group is using LACP. A port which joins an
LACP trunk group has to make an agreement with its member ports first. Please
notice that a trunk group, including member ports split between two switches, has
to enable the LACP function of the two switches. When disabled, the trunk group
is a static trunk group. The advantage of having the LACP disabled is that a port
joins the trunk group without any handshaking with its member ports; but member
ports won
’t know that they should be aggregated together to form a logic trunk
group.
Work ports:
This column field allows the user to choose the total number of
active port up to four. With
LACP static trunk group
, e.g. you assign four ports
to be the members of a trunk group whose work ports column field is set as two;
the exceed ports are standby/redundant ports and can be aggregated if working
ports fail. If it is a
static trunk group
(non-LACP), the number of work ports must
equal the total number of group member ports.
Click
Apply
.
Summary of Contents for 2204F Series
