© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
April 16 - Version 1
Owner Handbook Orion Link Batt 500™
Operating Modes
The Lanta Orion Link Batt 500™ has Five distinct operating modes. To select these, use
the “Mode” button to enter the menu. The “Setup” button steps through specific settings
for each operating mode.
1- In-built Program Mode
1. Press mode until it shows Pr**, you can select from 20 different built-in Programs. Press
“SETUP” and “UP” “DOWN” buttons to select the programs (from Pr01 to Pr20). and
select the desired program values.
2. When Pr01 is set, press “SETUP” and then “UP” or “DOWN” to choose from the nine
static colours.
3. When Pr02 to Pr20 are selected, press “SETUP” and then “UP” “DOWN” buttons to set
the values for running speed (SP00-SPFL) and strobe (FS00-FS99).
2- Auto Run Mode
1. Press “MODE” button to select “AUTO” The fixture will run the built-in programs Pr02-
Pr20 automatically.
3- Slave Mode
1. Press “MODE” button to select “SLAv” to run slave mode. Once connected via DMX it
will follow the Settings of the master fixture.
4- DMX Mode
1. Press the “MODE” button until it shows “d001”, this means DMX address is 001, you
can change the DMX address by pressing the “UP” and “DOWN” buttons.
2. There are 5 DMX modes. 3ch, 5ch, 12ch 2ch & 7ch. Press “SETUP” and then “UP” and
“DOWN” buttons to switch between these DMX modes
