© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
April 16 - Version 1
Owner Handbook Orion Link Batt 500™
When using built-in programs, pressing the “STROBE” button will set the light to Strobe.
Using “+” & “-” will allow adjustment of a value between “FS05” & “FSFL”. Press it again to
turn off Strobe.
Press the “SOUND” button to activate sound mode and then “+” & “-” to set a value
between “SU01” & “SU31”.
Press “Dimming” and then either “R” “G” “B” to select Colour Dimming mode. Set a
brightness value “0”~“255” using the “+” & “-“ buttons.
Note:
In the RGB version the “W”
& “A” buttons have no function.
Press any of the number buttons to select a static colour. When not in Colour Dimming
mode, “R” “G” “B” “A” “W” refer to Red, Green, Blue, Amber & White static colours
respectively.
Number
0
1
2
3
4
5
6
7
8
9
Colour
Cyan
Purple
Purplish
Red
Yellow White
Bright
Pink
Light
Green
Water
Blue
Brown
Warm
White
Once individually set, a group of lights can then be controlled via the remote or via
DMX to display the stored colour.
Press “ON/OFF” to turn the light off, press it again to turn it back on. Previous values will
be retained.
Note:
1. When in DMX mode and SLAVE mode there is no IR remote function.
2. To reset the light, press and hold the “MODE” & “SETUP” buttons at the same time
for 2-3 seconds or using the remote press “ON/OFF”+”9”+8”+”7” Display reverts to
“AUTO” . All settings will be factory default values.
