MY ELECTRONIC
SURPRISE SPIRAL
5
+
INSTRUCTION
MANUAL
1 electronic
creative station
HOW TO MAKE SURPRISE
ILLUSTRATIONS
1/ Prior to starting, an adult must remove the seal located
under the cap of the paint tubes and the glue tube.
Next, place the paint tubes and the glue tube in the
locations intended for this purpose (see ).
Use the stickers to decorate your surprise spiral (see ).
2/ Select an illustration, then attach it to the top plate by
placing it in the notches (see ).
3/ Place the protective ring on the creative spiral
(see ).
4/ Set the button to "1" to make your illustration spin
slowly and to "2" to make it spin fast (see and ). The
faster your illustration spins, the finer the strokes will be.
PREPARATION OF THE
TOY
Before you can use the electronic surprise
spiral, install the batteries in the product.
This operation must be performed by an
adult. Ensure that the electronic creative
spiral is properly turned off (button in the
OFF position, see diagram 1)
1) Unscrew the battery compartment cover,
located under the base of the creative station
(see diagram 2).
2) Insert 2 new LR6/AA batteries, preferably
alkaline, respecting the direction of polarity.
3) Firmly screw the compartment cover back
on.
You are now ready to make sparkling
creations!
Hello! Before starting to play, settle in comfortably at a table
or another flat, rigid and very clean surface. Remove all
elements from the box.
With an adult, carefully read the following instructions before
making sparkling creations.
1
1.5 V "AA" / LR6
1.5 V "AA" / LR6
2
10 illustrations
1 sheet of
stickers
1 protective
ring
1 tube
of glue
3 tubes
of paint
1 tube of
glitter
1
2
4
5
6
3
1
2
3
4
5
6
