26
DHCP Server Setting
Æ
DHCP
DHCP Server Control: Dynamic Host Configuration Protocol
assigns
dynamic IP addresses to devices on the network. This protocol simplifies
network management and allows new wireless devices to receive IP
addresses automatically without the need to manually assign new IP
addresses.
Select Subnet on device IP(Such as 192.168.2.254)
to allow the OUTDOOR
BRIDGE to function as a DHCP server.
start IP:
Input the first IP address available for assignment in your network.
end IP:
Input the end IP address available for assignment in your network.
router:
Input device IP
dns:
Input your ISP DNS.
Summary of Contents for WDR2000
