LanReady Technologies WDR2000, User Manual

Page: 11 / 40

11
Point to Multi Point Mode
Using the Configuration Menu
To configure the OUTDOOR BRIDGE, use a computer which is connected to
the OUTDOOR BRIDGE with an Ethernet cable (see the Network Layout
diagram).
First, disable the
Access the Internet using a proxy server
function. To
disable this function, go to Control Panel > Internet Options > Connections
> LAN Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator) .
Type the IP address and http port of the OUTDOOR BRIDGE in the address
field
(http://192.168.2.254) and press Enter . Make sure that the IP addresses of the
OUTDOOR BRIDGE and your computer are in the same subnet.
L2 Switch
LAN2
Wired Network
L2 Switch
LAN3
Wired Network
P2P-1
P2P-2
PMP
LAN1
Wired Network
PMP ( Wireless Bridge) Mode