www.lanpro.com
Active Products - Switches - LP-SGW2400
Input the Password (default there is no password), then
click the
“Apply”
and the Configuration window will show
as below:
5
Open the browser, input the http://192.168.2.1 and “Enter”
it, you will see the switch login window as below (take 24
Ports Switch as sample), (figure1):
4
Figure 1
Figure 2
There are items in the window’s left side, they are:
“Configuration”, “Monitoring” and “Maintenance”. You can
set the relative items according to your demands (the more
detailed guide will be mentioned in the later chapters, will
take the 24Port Switch as sample).
3.2 System
Figure 3
System:
Display current switch system situation
and you can set the relative items according to
your demands.
MAC address: Display the current switch MAC address.
Software Version: Display the switch Software version.
Hardware Version: Display the switch hardware version.
Temperature: This item is ineffective.
Active IP Address: 192.168.2.1 (default ).
Active Subnet Mask: 255.255.255.0 (default).
Active Gateway: 0.0.0.0 (default).
DHCP Server: 0 (default).
Lease Time Left: 0 (default).
4
