LP-N24 V2.0
Quick Installation Guide
N24 V2.0
Now you will be assisted by the
basic setup window. Select Ok
to apply the changes.
Under Windows XP:
4
Right click on My Network Places
in your PC and select Properties.
Right click on Wireless
Network Connection
and select View Available
Wireless Networks.
Select your SSID to connect;
3
Under Windows 7:
Click Network on the right end of the taskbar to
search your SSID.
Locate the SSID and connect.
You´re now authorized to access the
internet wirelessly.
After connecting to the SSID, continue the
process by following the onscreen instructions.
NOTE: The default SSID is shown as
LanPro LPN24V2
You´re connected to the
Internet!
In case you select Yes, restore the
LP-N24 V2.0 to its default values
by pressing for 10 seconds the
RESET/WPS button located at
the rear of the equipment. After
that, run the installation software
again.
Configuring your Wireless Network
