www.lanpro.com
LPN24V2_IG_ENB01W
1
2
Connect one end of the telephone cable to the DSL
port on your modem and the other end of the cable
into the spliter.
3
Connect one end of the Ethernet cable to RJ45 port
of your modem and attach the other end to the WAN
port of the LANPRO LP-N24 V2.0.
Connect the new cable (not provided in the box) to
one of the 4 LAN on the router, and plug the other
end into your computer.
4
Complete the process by connecting the power
adapter to the power input of your modem, and plug
the other end into a wall outlet. Do the same
procedure to power up the LP-N24 V2.0.
Connecting your wireless router
Telephone
Cable
Telephone
Cable
Ethernet
Cable
Ethernet
Cable
Power
Adapter
ADSL MODEM
LP-N24 V2.0
Wireless Broadband Router
Power Adapter
Wall outlet
Wall outlet
LP-N24 V2.0
Quick Installation
guide
NOTE: Before you begin, make sure your computer and modem are turned off. If you’re using
Static IP, Dynamic IP or PPPoA other than PPPoE access Internet, refer to the user manual.
