Lanpro LP-F30F User Manual Download

Page: 4 / 4

LPF30F_UG_ENB01W

www.lanpro.com

Step 1:

Pull the boot

and ring out from the

LP-F30F connector.

Step 3:

Press the LP-F30F tool to release the cable and check if they are the same

as the chart shows. If it is the same, install the connector again. If the length

between marks becomes shorter, broken fiber might be stuck inside the connector.

This connector can not be used anymore.

Step 2:

Put the

connector into the

LP-F30F tool, tape

the connector.

Step 4:

Restart the

installing process.

reset the SC Field Installable

LP-F30F Connectors (2.0/3.0 mm type)

Summary of Contents for LP-F30F

Page 1: ...then insert the 125 um fiber to reach the innermost until the buffer make a curve Then release the tool and check if this buffer is tight Step 7 Release the tape to take out the LP F30F connector and...

Page 2: ...F30F tool to release the buffer and check if they are the same as the chart shows If it is the same install the connector again If the length between marks becomes shorter broken fiber might be stuck...

Page 3: ...n release the tool and check if this buffer is tight Step 9 Release the tape to take out the LP F30F connector and cut the extra yarn Step 11 Release the tape to take out the LP F30F connector and don...

Page 4: ...ame as the chart shows If it is the same install the connector again If the length between marks becomes shorter broken fiber might be stuck inside the connector This connector can not be used anymore...