LPF30F_UG_ENB01W
www.lanpro.com
reset the SC Field Installable
LP-F30F Connectors (0.9 mm type)
Step 1:
Pull the boot
out from the LP-F30F
connector.
Step 3:
Press the LP-F30F tool to release the buffer and check if they are the same
as the chart shows. If it is the same, install the connector again. If the length
between marks becomes shorter, broken fiber might be stuck inside the connector.
This connector can not be used anymore.
Step 2:
Put the
LP-F30F connector
into the tool, tape
the connector
Step 4:
Restart the
installing process.
