8
Chapter 2: Installation Guide
2.1 Software Installation
2.1.1 Overview
The 575G Setup Wizard will guide you through the installation procedure for
Windows 98SE, Me, 2000, XP, Vista and Linux, Macintosh
.
The Setup Wizard
will guide you install the Utility and drivers.
If you install the hardware before the software, you will be prompted “Found
New Hardware Wizard”, click the Cancel button, and run the Setup Wizard
program on the CD-ROM.
The Setup steps for Windows 98SE, Me, 2000, XP, Vista and Linux, Macintosh
are very similar. The following setup steps are for windows 2000.
2.1.2
Software Installation for Windows 2000
1.
Insert the Resource CD into your CD-ROM drive, click the Start button
and choose Run. In the field that appears, enter F:\XXX\Setup.exe (if
“F” is the letter of your CD-ROM drive; XXX presents the setup program
path, which is labeled on the Resource CD), figure 2-1 should then
appear.
2.
You can click the Cancel button to end the installation on the Preparing
Setup screen, figure 2-1. Otherwise, the Setup Wizard will display a
screen similar to that shown in figure 2-2 after a moment.