www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-348 123 Manual in Client Mode
Figure 16 b
b
Enter in the AP and verify option: Connections that the LP-348 client is connected. Please see figure 16b.
17
In the window shown in figure 17, proceed to change the
administration password of the equipment. Even though it
is not mandatory, we highly recommend that you change
the administration password of your equipment, we must
remind you to store it in a safe place to which you can
have access in the event that you forget it. If you lose
it, you must reset the equipment to factory values and
lose any setup you have made. Please use for this the
123 manual on how to reset to factory values, document:
LP348_M123_ENC01W.
In order to change the password, please select option:
Change Password, located in the menu: Management
as shown in the figure 17.
Figure 17
18
In the window shown in figure 18, input in: Current
Password the old password, in: New Password
, the
new password you want to use, in the field: Repeat New
Password, do as indicated and the select: Apply.
Figure 18
7
