www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-348 123 Manual in Client Mode
14
In this example, we will generate the same keys of the
AP and will establish the same ways of authentication
and encryption. In order to do this, in figure 14, in
mode of authentication with: Shared Key, in: Data
encryption we will select: 64 bits WEP , then we
must input in Passphrase: the same used in the
AP, then we will select: Generate Keys, in this way
we will generate the same keys in the Client LP-348,
then we will select: Key 1, which is the active one in
the
AP, then we will select: Apply.
Figure 14
15
In this case, a new message will be prompted, (See
figure 15), with the information, that will indicate you
the keys that apply for all the security profiles, then
select:
OK.
Figure 15
16
Please wait for about 30 seconds and verify the equipment connectivity, in order to do this:
Figure 16 a
a
Send a
PING to the destination AP, (Please see figure 16a).
6
