HD
62
User Manual
www.lanoptik.com
- 1 -
Chapter 1 Notes and Safety Requirements
1.1 Cautions and Notes
(1)
To avoid danger or damage incurred to the lens, do not touch the lens
or sensor directly with your fingers.
(2)
To avoid failure or electric shock hazard and so on, do not disassemble
or modify the internal structure of the device.
(3)
Do not plug in or unplug the Power connection port when hands are wet.
(4)
Do not use alcohol and other organic solvents to clean.
(5)
If the lens or sensor is dirty or damp, you should better use dry
and non-linen fabric or professional lens tissue to wipe them. To
avoid scratches on the surface, do not touch the lens with your fingers.
Wipe the lens or sensor lightly.
(6)
The products are not specifically designed for an outdoor use. Do
not expose it to outdoor environment without any protection.
Excessive temperature and humidity will damage the lens. Please
avoid using the product under the following environment: high
temperature or high humidity environment, places with direct
sunlight, dirt or vibration and places near heat source.
(7)
Please use and store in the following environment:
Operating temperature
：
0
℃
~ 40
℃
Storage temperature
：
-20
℃
~ 60
℃
Operating Humidity
：
30~60%RH
Storage Humidity
：
10~80%RH
(8)
If any foreign matter, water or liquid enter into the device by
accident, disconnect the Power line immediately. Please send it to the
maintenance center and do not use the hair dryer to dry it by yourself.
(9)
To prevent microscope from being tripped over or dropped, please
put away the device's connect cable in use or standby.
(10)
To avoid electric shock by accident, please power off microscope
before you move your display or equipment.
(11)
The cleanliness of the device lens will directly affect clarity degree
of contents from the computer screen during preview. Problems like
various circles or spots on the screen may mostly be incurred by dirt
on the lens. When cleaning, please use professional lens tissue or
other professional detergent to clear the dirt on the lens.
