Chapter 7 Instructions of Operation
This HDMI digital microscope can be used as a standalone device when paired with an HDMI monitor, or as
a USB device when connected to a PC. When connected to a PC using USB, the microscope will enter PC
mode, taking precedence over the standalone functions.
User's Manual | CE210T HDMI Microscope
www.lanoptik.com
- 6 -
7.1 Articulating Arm
The articulating arm can be adjusted around three joints to position the microscope at virtually any angle
and position within the reach of the arm. All joints are locked simultaneously using the locking knob. Before
adjusting the arm, be sure to support the microscope with a hand. Next loosen the locking knob until the
arm joints are loose enough to easily move. Position the microscope as desired, then tighten the locking
knob. Avoid extending the arm beyond the rear edge of the support plate, as this could lead to the
microscope tipping over.
7.2 Focus
The microscope’s focus is mechanically controlled using a knob on the control panel. Rotating the knob
clockwise will extend the working distance to focus on objects farther away. Rotating the knob counter-
clockwise will reduce the working distance to focus on closer objects. Magnification is also affected by
these adjustments, increasing as the working distance is shortened.
