5.1.2 Disassembly the Camera CA800
Chapter 5 Product Assembly Guide
5.1 Camera CA800 Assembly
5.1.1 Assembly with biological microscope
Loosen the fixing screw of the microscope.
Remove the eyepiece part of the microscope.
Place the eyepiece part of the microscope to the female interface of the camera CA800.
Tighten the fastening screw.
1.Separate eyepiece part from objective part as shown in figure 1
2.Assembly the camera CA800 as shown in figure 2
3.Assemble eyepiece part of the microscope as shown in figure 3
4.Connect the integrated camera to the USB port of a computer, run the software and start using it.
Please refer to User manual of Pixit Pro software.
1
．
Reverse the assembly sequence
User's Manual | CA800 Series Embedded Camera
www.lanoptik.com
- 5 -
Figure1
Figure2
Figure3
