NCS2-VT04 User Manual
10
To reduce the risk of personal injury, electric shock, or damage to the system, please remove all power
connections and wear ESD protection gloves when handling the installation steps.
1. Power off the system and select an NCS2 slot on the system.
Note: The system shown in the image below is for reference only.
2. Rotate clockwise and loosen the two lock-
screws on the door.
3. Remove the door and insert the module.
Align the golden fingers to the socket on
the motherboard carefully while inserting
the module.
Warning
(1) To reduce the risk of personal injury, electric shock, or damage to the equipment, please remove all power
sources. (2) Please wear ESD protected gloves before conducting the following steps. This exclamation point
indicates that there is a caution or warning and it is something that could damage your property or product.