Lanner NCA-5710 User Manual Download Page 78

Page: 78 / 132

NCA-5710 User Manual

Network Stack Configuration

Feature

Options

Description

Network Stack

Disabled

Enabled

Enables or disables UEFI Network Stack

Ipv4 PXE Support

Disabled

Enabled

Enables Ipv4 PXE Boot Support. If IPV4 is
disabled, PXE boot option will not be created.

Ipv4 HTTP Support

Disabled

Enabled

Enables Ipv4 HTTP Boot Support. If IPV4 is
disabled, HTTP boot option will not be created.

Ipv6 PXE Support

Disabled

Enabled

Enables Ipv6 PXE Boot Support. If IPV6 is
disabled, PXE boot option will not be created.

Ipv6 HTTP Support

Disabled

Enabled

Enables Ipv6 HTTP Boot Support. If IPV6 is
disabled, HTTP boot option will not be created.

PXE boot wait time

Wait time to press

<ESC>

key to abort the PXE

boot

Media detect count

Number of times the presence of media will be
checked

Summary of Contents for NCA-5710





































































































































Search results

Summary of Contents for NCA-5710

Reviews:

Lanner NCA-5710, User Manual, Page: 78 / 132

Search results

Summary of Contents for NCA-5710

Reviews: