Lanner NCA-4030, User Manual

Page: 34 / 87

NCA-4030 User Manual
34
5. Align the bracket to the side of the
chassis and make sure the screw-
holes are matched, and then secure
the bracket onto the chassis with
three provided M4X4L screws.
6. Repeat Steps 2~5 to attach the bracket to the other side of the chassis.
7. Follow the instructions in Installing the System Using Mounting Ear Brackets Only to attach the Mounting
Ear Brackets.
Now, you shall install the slide rail
assemblies onto the rack.
8. This slide rail kit does NOT require
screw-fixing. Simply aim at three
available screw holes on the rack
front and snap the rail front into the
rack post as shown in the image.
You should hear a
“click” sound
once it is firmly attached.
Align the screws with the holes indicated on the brackets and the
screw holes on the side of the chassis.
Left Rail Bracket
Right Mounting
Ear Bracket
Right Rail Bracket
Use this clamp
to fix the front
end of the rail
onto the post.
Click
Left Mounting
Ear Bracket