Chapter 4: BIOS Setup
63
USB transfer time-out
1 sec
5 sec
10 sec
20 sec
Set USB time-out value (1, 5, 10 or 20
seconds) for Control, Bulk and Interrupt
transfers. The default is “20 sec “.
Device reset time-out:
10 sec
20 sec
30 sec
40 sec
Set USB mass storage device Start Unit
command time-out (10, 20, 30 or 40
seconds). Default is “20 sec “.
Device power-up
delay
Auto
Manual
Set the maximum time the device will
take before it properly reports itself to
the Host Controller. “
Auto
“ uses default
value. For example, it is 100ms as a root
port.
