Chapter 4: Hardware Setup
32
The system can be customized to enable SMA antenna connectivity. Please follow the steps below to install
the antenna.
1.
Plug the female connector of the SMA antenna cable to the “MAIN” and “ALT” connectors (antenna
connector of a wireless network module), as shown in the image below.
2.
Plug the male connector of the SMA antenna onto the designated port as shown in the image below.
3.
Use the supplied rings to secure the male connector from the front panel.
4.
Tighten the rings and install the antenna. When installing the antenna, rotate it until it is tightened.
