25
CHAPTER 4: HARDWARE SETUP
Accessing the Inside of LEC-2580
To access some components and perform certain service procedures, you must perform the following
procedures first.
WARNING:
To reduce the risk of personal injury, electric shock, or damage to the equipment, please remove all power
sources.
Please wear ESD protected gloves before conducting the following steps.
Do NOT pile items on top of the system to prevent damages due to this improper use. Lanner is not liable
for damages caused by improper use of the product.
1. Power off LEC-2580 and remove the power cord.
2. Rotate and remove the four rubber pads at the bottom compartment.
2. Lift and open the chassis.
