Lanner LEC-2290H User Manual Download Page 58

Page: 58 / 107

LEC-2290H User Manual

Feature

Options

Description

Security Device

Support

Enabled

Disabled

Enables or disables BIOS support for security device. By
disabling this function, OS will not show Security Device. TCG
EFI protocol and INT1A interface will not be available.

TPM State

Enabled

Disabled

Enables or disables Security Device.

NOTE

: Your computer will reboot during restart in order to

change State of the Device.

Pending

operation

None

TPM Clear

Schedules an Operation for the Security Device.

NOTE

: Your computer will reboot during restart in order to

change State of Security Device.

Device Select

TPM 1.2
TPM 2.0

Auto

TPM 1.2

will restrict support to TPM 1.2 devices; while

TPM

2.0

will restrict support to TPM 2.0 devices;

Auto

will support

both with the default set to TPM 2.0 devices. If not found, TPM
1.2 devices will be enumerated.

Summary of Contents for LEC-2290H












































































































Search results

Summary of Contents for LEC-2290H

Reviews:

Related manuals for LEC-2290H

Brands by name

Popular brands

Lanner LEC-2290H, User Manual

Search results

Summary of Contents for LEC-2290H

Reviews:

Related manuals for LEC-2290H

Brands by name

Popular brands