Lanner ICS-P570, User Manual

Page: 24 / 63

ICS-P570 User Manual
24
The motherboard supports one M.2 M-Key for SATA storage module expansion. Please follow the
procedures for installation.
1. Power off the system and remove the
bottom side chassis cover.
2. Unscrew the two (2) screws on the
system ’ s top panel, and remove the
metal partition.
3. Align the notch of the SATA storage
card with the socket key in the pin
slot.
4. Insert the storage card pins at 30
degrees into the socket until it is fully
seated.
5. Push down on the module card and
secure it with one (1) screws.
6. Next, thermal pad placement. Remove
the protective film on the thermal pad
(included in the accessory pack) and
gently place on the module card.
7. Then place the metal partition over
the thermal pad, and secure with two
(2) screws on the right side.
Notch
So
cket
Key
Metal Partition