Lanner HTCA-6200, User Manual

Page: 27 / 81

27
6. Prepare the supplied heat sink
7. Place the heat sink on top of the CPU socket.
8. Align the four screw holes around the socket.
9. Tighten the four screws to secure the heat sink.
Please follow the steps below to install the DIMM memory modules.
1. Power off the system and locate the DDR DIMM slot.
2. Pull open the DIMM slot latches
3. Align the DIMM module and make sure the notches of the module aligned with the socket keys in the
slot.
4. Insert the module into the slot until it’s firmly seated and close the latches.