20
Bios Settings
Chapter 4
Network Application Platforms
Option
Description
15
Set this value to stop the AMIBIOS from searching
the IDE bus for IDE disk drives in 15 seconds.
20
Set this value to stop the AMIBIOS from searching
the IDE bus for IDE disk drives in 20 seconds.
25
Set this value to stop the AMIBIOS from searching
the IDE bus for IDE disk drives in 25 seconds.
30
Set this value to stop the AMIBIOS from searching
the IDE bus for IDE disk drives in30 seconds.
35
Set this value to stop the AMIBIOS from searching
the IDE bus for IDE disk drives in 35 seconds.
SuperIO Configuration
In this screen, you will be able to modify the IRQ address
of the serial and parallel ports which are provided by the
Winbond 83627THG chip.
Configure Win627THF Super IO ChipSet
You can use this screen to select options for the Super I/O
settings. Use the up and down <Arrow> keys to select an
item. Use the <Plus> and <Minus> keys to change the
value of the selected option. The settings are described
on the following pages. The screen is shown at right.
Serial Port1 Address
This option specifies the base I/O port address and Interrupt
Request address of serial port 1. The Optimal setting is
3F8/IRQ4. The Fail-Safe default setting is Disabled.